...

AC-5 Constant Curve Speaker System:

 

AC-5 is a line source system suitable for sound reinforcement applications with a distance of ≤40 meters. It has high fidelity and high sound pressure level.

Designed for low-distortion professional sound reinforcement and demanding speech sound reinforcement applications.

 

The AC-5 features six 5-inch mid-woofers that deliver low frequencies down to usable frequencies of 85 Hz, and three 44mm composite diaphragm

neodymium magnetic compression drivers that are specially designed to optimize vertically directed asymmetric waveguide progressive curvature

projection. The vertically directed asymmetric waveguide diffusion projection has an average horizontal direction of 140° and a vertical 35° (+10/-25°)

direction. It is optimized for ultra-wide horizontal coverage, making the far and near field sound pressure level coverage very uniform. Reduces

the possibility of microphone howling. The vertical directivity is controlled at 35 degrees to about 250HZ, which reduces unnecessary reflections

from the floor and ceiling and improves the clarity of sound reinforcement and music.

 

The built-in crossover system reduces the number of power amplifier channels and drive channels, making it more environmentally friendly and

energy-saving, and improving the drive efficiency of the power amplifier. After built-in frequency division design combined with unique FirApc

technology optimization algorithm processing, the phase 350HZ-18KHZ is maintained at about ±15°. Unnecessary phase distortion is reduced.

Make the sound reinforcement reproduction more natural. After optimization with FirApc technology, the frequency response curve 100HZ-17Khz

can be controlled at around ±1.5dB. The listening experience is more rounded and durable.

 

Its matching AC-S subwoofer has two 12-inch 4-inch voice coil neodymium magnet ultra-long-stroke high-power drivers, which provide low-frequency

extension and supplement for AC-S. The lower limit frequency is as low as 32Hz, and the available frequency bandwidth is multiple. When used,

it can form a cardioid pointing array.

The AC-5 can be wall-mounted or pole-mounted, and an optional flight case is available for touring performances. The AC-5 can be quickly mounted

on top of the AC-S subwoofer using QUC quick connectors.

 

 

Model:AC-5

Unit type: Built-in two-way full-range speaker

Unit configuration: LF: 6x5-inch ferrite cone cone driver

                 HF:3x1 imported neodymium magnetic composite film compression driver, 44mm voice coil

Frequency response: 80Hz-20KHz

Maximum SPL: 137dB

Coverage angle: H/V 1 409/35*( + 10°-25° )

Power (AES): 600W

Nominal impedance: 8Ω

Hanging: Optional QUC quick connector and M10 wall-mounted fixed installation

Dimensions (WxHxD): 140x1300x170mm

Weight: 25.4kg

 

 

Model:AC-S

Speaker type: external crossover subwoofer

Unit configuration: 2x12-inch neodymium magnetic paper cone cone driver

Frequency response: 32Hz-150Hz

Maximum SPL: 142dB

Coverage angle: can form a cardioid pointing array

Power(AES): 2000W

Nominal impedance: 4Ω

Dimensions (WxHxD):340x850x350mm

Weight:36kg